Waterjet - SUPREMA DX 510
4 axis I.T.C™ Technology (Intelligent Tapering Control™)
|
|
|
EU Patent EU N. DE 20 2007 012 572 U1
The I.T.C™ System corrects for taper and achieves wall straightness and the highest possible cutting speeds, by compensating through CNC the inclination (up to 2°) and orientation of the high pressure water jet. This ensures a high quality part at a low cost.
During the I.T.C™ compensation, the Jet is also directed towards the piece in order to reduce the Tail Delay effect and the acceleration-deceleration ramp times in the corners, for faster and more economical cutting cycles.
The WaterCad-Cam™ Software generates the I.T.C™ Program just by a few Clicks
|
|
|
|
|
|
|
|
| With ITC |
Without ITC |
|
|
|
X = 3.350 mm
Y = 1.850 mm
Z = 180 mm
d = Infinite
|
Net Cutting Area |
X = 11'
Y = 6'
Z = 7''
d = Infinite
|
4.800 mm x 2.950 mm
x h 1.900 mm |
Overall Table Dimensions |
16' x 10' x
h 6' 1/2 |
| 0 - 20 mt / min |
Rapid Speed |
0 - 67' / min |
| 6.000 Kg |
Table Weight |
13.500 Ib |
| ± 0,05 mm |
Pa: Position Accuracy |
± 0,002 |
| ± 0,025 mm |
Ps: Repeatibility |
± 0,001' |
| ± 0,05 mm |
Ball Bar Ø 300 mm |
± 0,002' |
|
|
|
| Model |
DX (4 axis) |
| 44 |
 |
4' x 4' |
1.250 x 1.250 mm |
| 510 |
 |
6' x 11'
|
1.850 x 3.350 mm
|
| 612 |
 |
6' 1/2 x 13' 1/2 |
2.000 x 4.000 mm |
| 620 |
 |
6' 1/2 x 20' |
2.000 x 6.100 mm |
| 820 |
 |
8' x 20' |
2.500 x 6.100 mm |
| 1020 |
 |
11' x 20' |
3.350 x 6.100 mm |
|
|
